Dennis Storch Company established 1979

PACKAGE DEALS or by the piece

Presses For Sale
Heidelberg SM 102VP, 1977, 138 MM actual impressions, Dahlgren damps, very good running press, no cylinder or gear damage. This is an older machine but very clean. This press is still under power and can be demo'd. $40,000.00

Heidelberg 72VP, 1980, Perfects 2 / 2, Standard damps, 165 MM imps. This press has been running high quality color work. Very good press. Price: $69,500.00

Heidelberg SORMZ, 1979, Conventional Dampening, Pierry IR dryer, S.N. 513XXX, 107 million impressions, 2 sets of dampening rollers, SuperBlue, Baldwin Sheet Decurler/Powder Spray unit, Factory Tools, Manuals, 5 press carts, delivery seperator, etc., ALL cylinders are guaranteed to be free from damage (photos attached). Up and running for inspections. $35,000.00

Solna 124, 1 color
Solna 224, 2 color
Owner says they both run fine but he no longer uses them. $10,000.00 LOT

TWO PRESSES, SAME SHOP! Looking for offers on each or both machines
1981 102-ZP Conventional Dampners, No Damage, 62,716,933 Impressions. Runs well and available for print test, under power. Oxy-Dry powder, Baldwin R&R Serial # 5178XX $37,500.00

1980 SORKZ 19" X 251/2". Conventional Dampners, Serial # 5154XX, 80,800,125 Impressions. No damage.Runs well and available for print test!
$27,500.00

1993 Perfomance Power Folder Gluer! Needs two nozzle's at $65.00 each, Runs well!, Under power. $ 2,000.00
Pictures for all on request! All three Located SE, USA

Plant Liquidation: The cleanest machinery you will ever see. All machines under power.
1987 MOZP-S (2) Color Press 45MM, Stream Feeder, Perfector PERFECT CONDITION. Includes $14k of spare parts including $10k Compressor and new rollers
1989 GTOZP (2) Color Press, 17MM, Crestline Dampening, Perfector. PERFECT CONDITION, Includes spare main drive motor (NEW in box)
2000 Challenge 305MB Cutter
New Microcut Jr., (4) spare blades
Challenge 305 Cutter gold
1999 Stahl B20 4/4 folder very clean
2002 Baum 20/20 4/4 folder, very clean
2005 Challenge 3-Hole Drill, Barely Used
2006 Challenge 3-Hole Drill
Heidelberg Windmill
Ryobi 2 color
Mailing / Inserting machines
Prepress, etc.

All offers considered, located South East:

1997 Komori Sprint SII 26, Royce recirc., de-curlers, anti-static bars, running reg., 25 mm, Great condition! - $26,500.00
Ryobi 3304HA four color offset printing press, with console, semi auto plate, blanket washers, recircs, 7mm, 2001 - $57,000.00
2003 Hamada DU34 Perfector, 13.3x17.75" - $8,750.00

Bindery and Finishing
2003 Duplo system 4000 10 station air fed collator, bookletmaker with Hohner heads, and conveyor delivery - $20,500.00
Polar 92, 36" programmable cutter, 1991- $13,500.00
Polar 155EMC cutter 61", with programmer, 1980 - $21,000.00
Challenge 305MPC cutter, 1993, digital programmer, good condition - $7,000.00
Baum ND multiple spindle drill, 3 heads, circa 2000 - $3,000.00
Haskins hand fed pocket folder/ gluer, $7,250.00
Como 45" paper cutter, programmable, 1990 - $10,500.00
Rosback 203C - 6 pocket stitcher with a 250R three-knife trimmer - $7,250.00
Baum 2020 folder, 20"x26", air pile feed, right angle section - $4,000.00

1974 Polar - Mohr 90 CE
36”, Programmable, tools, extra blade, still under power and available immediately . $5,750.00 LOT

1985 Heidelberg MOF
5 color ,19 X 25 “, Alcolor Dampening system, CPC 1.02, IR dryer, Baldwin Refrigeration and Recirculation, Powder Spray, super blue on all the units,89 million impressions, super clean press, well maintained, manuals no damages to cylinders or gears, extra rollers and available now. This is a European press and good running condition. VIDEO AVAILABLE. $69,000.00 LOT

1985 Akiyama Hi-Ace 228
2 color, 20 X 28 inches, Aki II damps, 79 Million impressions, Manuals, Tools, Dollies, good running condition, Continuous feed and delivery, no damages to cylinders or gears, super clean press, still under power for a print test and available immediately.$18,000.00

Equipment for sale, located Manhattan NYC: $ Best Offers

1997 Heidelberg DI 46-4 Classic, 14,815,638 impressions : 2002 Polar 92E Cutter : 2002 Stahl B20 Folder with right angle : 1996 Dolev 200 with Carnfeldt film processor GL 171 on-line 1996. All equipment is reported in good condition, photos on request.

PLANT LIQUIDATION, LOCATED MID-WEST: BEST OFFERS:
1977 Heidelberg SORKZ - 1987 Heidelberg SORSZ
1987 Heidelberg SM102 S+L - Heidelberg Windmill Letterpress
Miller TP236 Perfector - Miller TP438 2/2 Perfect
2 Miehle 129 1 color 29" - 3 Miehle V 50's Letter Press
Miehle 136 1 color 36" - 2 ATF Chief 15 - 3 ATF Chief 215
1 ATF Chief 217 - 1 Harris 136 - KLUGE 12x12 Letterpress
2 Lawson Pacemaker II 42in Cutter / Microcut
1 Polar 115 CE Periscope / Micro - 2 MBO Folder's 23x35 Folders 4 – 8 – 16 pg
1 MBO Folder's B26 4/ 8/ 16pg - 2 Baum Folder's 22x28 - 1 STAHL Folder 42”
1 Bunn Tying machine - 1 Muller 6 pkt gather only - Harris 750 8 pkt gather, Cvr, Stitch Stack
1 Tab cutter - 1 Interlake - 1 Bostitch # 17 8 Sticher heads - 1 ACME - 1 Challenge 4 Heads
1 GBC Punch - 3 Southworth Round Corner Mach. - 3 BOURG Collators 20 Pkts.
Friction 30 Pkts. - 38 Pkts. w/ Cover and stitcher - 1 Nygren Daly Punch - 1 Nygren Daly Drill
1 WELDOTRON L Sealer w/Tunnell - 1 Shanklin L -Seal & Tunl Auto Wrapper power take off and U shaped conveyor - 3 Fork Lifts Walk behind.

1991 Man Roland 606 LE, Non-stop F&D, MR Coater, Dryer, WCV-Ink Chilling-Baldwin, 150+ mm imps, Royce recircs, No additional automation, Royce Recircs $80,000.00 Or Best offer.

1994/5 Heid 102 SP+L, 2/4 Perfector, Alcolor, CPC 1.02, CP-Tronics, Autoplate, IR Dryer, Auto Register, 300+ mm imps, Very good cond
Not under power, $170,000.00 Or Best Offer.

1993-4 SM 72-FP, SN: 535-6xx, CP-tronics, CPC 1.02, Alcolor, Ink temp Control, Technotrans R&R, IR Dryer, Blanket wash, Diagonal Register
Cont Delivery, Uses house air, 99mm imp July 09 $170,000.00 OBO Running Daily.

1997 Ryobi 3302, 2 color 13 x 18", Crestline damps, Powdr Spray, Tempest Hot air dryer, Print count = 29mm imp, Machine revs = 48 M/Imp
Service performed Dec 2008, Repair-Replace, Clean , Oil, adjust, $10,500.00 OBO x-site, Good running cond.

Photos available upon request.

ADDITIONAL EQUIPMENT
Horizon (best-buy)	2000	2000 Horizon BQ 440. Nice photos, located South region US..	$16,000.00
Kluge	13x19"	(3) Kluges to move from 1 Location --all 3 are 13" X 19" with Kuge Feeders --1 with single Foil & Honeycomb Chase--1 with just Foil--1 set up for Die cutting only --also includes mechanichal boss Foil attachment w/o heaters & Controllers, located North East.	$11,000.00
2007 MBo	B-30	2007 MBO B30 4/4 with Z2 Knife Fold, 16-Page Folder. Machine includes: continuous feeder, parallel and right angle folding sections, and Z2 Knife folding section. Also includes gate fold plate. In excellent condition. Located West Coast.	$52,500.00
2004 MBO	B-30-S	2004 MBO B-30-S 4/4: This MBO Perfection Series Folder is complete with Suction Tape Feeder, Dual Feed, Four (4)Plates in Main Section, Four (4) Plates in 8-Page Section, Standard Motorized A-76 Delivery All Accessories and Books. Located Florida.	$49,000.00
Mitsibushi	DPX 5080	2002 Mitsibushi DPX 5080 platesetter with RipMate 4.1. Very clean with low use. Upstate NY. nice photos.	$11,000.00
Polar	92EMC	1986 Polar 92 EMC 36" Cutter with safety barrier beams, air bed, everything!!! 92EMC Machine is complete and running with manual and all accessories. Unit comes with false clamp and original toolbox. Recently acquired, currently on pallet and ready to ship! Located West Coast. photos available.	$15,500.00 LOT
Polar	115EMC	1985 Polar 115 EMC MON, complete with all available manuals and tools. Very nice cond.	$16,500.00
Polar	115EMC	1983 Polar 115 EMC Cutter with the newer style Lawson Computer , this Company Merged 6 months ago and this was Excess for them so they had it Professionally taken apart & put in their Warehouse. Owner confirms very good condition. Photos available, Located Mid-West.	$14,500.00 LOT
Stahl	ST90	1994 Stahl ST90 Saddle Stitcher, 6 Pocket + Cover Feeder, 2 Hohner Stitching Heads, 3 Knife Trimmer w/ 4th & 5th Knife, Rima 105 Stacker.	$26,000.00 OBO
Stahl	20x26"	1990, pile feeder with right angle attachment (2nd. rt angle not running), located L.I.C.,NY. loading dock 15", owner retiring.	$18,000.00 OBO
Thompson	Diecutter	Thompson diecutter, 28x41" located OH. works well but needs cleaning.	$10,500.00

WHAT ARE YOUR NEEDS ? CALL US, WE'LL FIND IT !